Advertisement

Infinite lives: the company saving old arcade machines

On a rural industrial estate five miles outside Honiton, under the flight path of a nearby aerodrome, sits a rather nondescript warehouse. Only one feature marks it out: in front is a graveyard of stripped arcade cabinets, slowly rotting in the cold and damp.

I am here to visit Play Leisure, a company that restores and sells old arcade games. It has a compelling TikTok account where it shares new discoveries – a recent post showed off a Deadstorm Pirates machine with its enormous sit-in cabinet and giant cinematic display. I’ve dragged my friend and fellow arcade fanatic Joao Sanches along, and now I’m feeling nervous and responsible because, walking up to the unmarked entrance, I’ve no idea if they will have anything interesting in stock after our 90-minute drive.

But peering inside, I spot it immediately, sat there in the cramped reception area amid piles of cardboard boxes: a pristine 1992 Street Fighter II machine, the backboard sporting a wild illustration of Ryu kicking Ken, each special feature on the playfield named after famous Street Fighter attacks. I almost gasp.

Matt Conridge, the owner of Play Leisure, has always been interested in arcade machines. “Like a lot of us in our 30s and 40s, it comes from back when I was a kid,” he explains as he comes to greet us. “I used to visit arcades at seaside resorts – places like Dawlish and Lynmouth.”

Three years ago, Conridge was running a video game bar in Bideford, north Devon, when Covid hit. Facing disaster, he decided to close up and use his contacts in the arcade scene to pivot into a new project: restoration. He rented a warehouse, employed a small team of specialist engineers and started buying up all the old coin-ops he could get his hands on. The plan was to repair them and sell them on to private collectors and retro theme bars, after the pandemic.

“Back then, we were only buying small quantities so it usually came from collectors. Now we take them on an industrial scale,” says Conridge. “At the moment, with what’s happening in the economy, arcades are cutting costs, getting rid of some of the lower performing machines that cost them more to run than they make in revenue. We get clearances from arcades, play centres, trampoline parks … ”

Another problem is that older coin-ops require specialist engineers to maintain them. “A lot of the people who used to build and service these machines have retired,” says Conridge. “That knowledge is dying.”

Matt takes us through to the main warehouse space, where we’re momentarily stunned again. Crammed into a space about the size of a tennis court are 200-odd arcade machines from throughout gaming history. The first thing I spot is the twin cabinet version of Sega’s brilliant 1995 racing game Manx TT Super Bike, which allowed players to sit on reproduction motorcycles and compete against each other along narrow country lanes. Nearby there’s Konami’s thrilling Silent Scope 2: Fatal Judgement, complete with its authentic sniper rifle controller, and further back in this electronic labyrinth is a twin cab of Final Furlong, the crazy Namco horse racing game that you control by sitting on a plastic horse and jumping up and down.

I’m taken back to the first time I visited Japan in 2000 to attend the Tokyo Game Show. I walked into an arcade in Akihabara and saw salarymen on their lunch hour, dozens of them in rows playing this game, grimacing with effort in the darkness.

The machines arrive in huge shipping containers and Conridge is never quite sure what games he’ll find or what condition they will be in. “The problem is, arcade operators don’t generate any more money by keeping machine internals clean,” he says. “If you open it up and start cleaning the inside you may end up causing issues. We’ve opened them and found coins, tools … We found a porno mag in the back of a machine once. We’ve just got one from Blackpool, a crane machine that dispensed sweets – it’s been left for a few years and the sweets have fallen inside and rotted, then the flies got in there … ugh.”

Will they clean that? “No,” laughs Conridge. “We’ll sell it off and let someone else deal with it.”

Conridge is however, conscientious about whom he sells brittle older machines to. “There are some retro machines that we advise people not to buy unless they’re technically minded,” he says. “There’s a pinball machine, a 1966 electromechanical model we’re just about to put on sale, and we’ll refuse to sell that to nine out of 10 people who contact us because we know it won’t be suitable for them. These machines are like classic cars: they are specialist pieces of equipment and need constant care. If I sell it to someone who just wants a working machine, they’ll be fed up after five minutes – we’ve got to choose the right customer for it. Someone who is able to tinker.”

It’s not just ancient pinball machines that are problematic. The big video arcade games of the 1990s – the technical peak of the industry – often used proprietary hardware that is simply impossible to replace or reproduce. “The Sega Model arcade boards used custom Lockheed Martin chips, which you just can’t source. We have to decide whether to harvest parts from less interesting games and use them to resupply classics like Sega Rally.” Around the outskirts of the warehouse space, there are shelves groaning under the weight of esoteric parts, haphazardly piled or collected in boxes.

Adding to the value of these machines now is the fact that arcades historically dumped old units when they stopped being profitable. “Ten to 15 years ago companies just didn’t foresee that there would be any interest from collectors,” says Conridge. “We just sold an Addams Family pinball machine for £10,000 – that would have been chucked in a skip 15 years ago. People didn’t expect anyone would want them.”

This was especially true of larger speciality machines, such as rhythm action games, with their bulky floor pads and complicated controllers, and driving games with their realistic race car cabinets. Not only did they take up valuable floor space, they were expensive to maintain. Their growing rarity represents an interesting challenge for Play Leisure, because games like Dance Mania and Guitar Hero are exactly the sorts of machines that the new era of retro gaming bars – such as the NQ64 chain, which has just taken on £2m of funding – are looking for: not only are they fun to play in a bar environment, they’re fun to watch, too. “Dance Mania is now a £3k machine,” Conridge says.

When cabinets arrive, their condition is assessed. For Conridge there is a delicate balance between restoration and preservation. He shows me a Point Blank machine that’s just come in: Namco’s entertaining light gun shooter, which was also popular on the PlayStation, is a currently a hit with buyers. He will aim to repair these machines whatever state they arrive in – even though the guns themselves, with their delicate recoil mechanic, are often busted beyond repair (“they get really smashed by kids in the arcade”).

On this cabinet, the lavishly illustrated decals on the sides are peeling off: do they change the artwork for a modern reproduction? “If we do, it will look better but it won’t be original,” says Conridge. “It’s a challenge. We don’t tend to sell perfect-looking machines. When we went into arcades as children, the machines would have cigarette burns – that’s how you remember them. There’s a certain charm to that.

Some arcade cabinets are not economically viable to repair, but that doesn’t mean they’re unsellable. “We sell quite a lot of project machines,” he says. “For a collector working in their garage, that’s fine. We had a Star Wars 1982 Atari machine come in about 14 months ago. We put it on TikTok and Facebook – someone rang and they were desperate for it. It was nice to save this original machine from being scrapped.”

If they can’t be repaired, they’re stripped for parts: circuit boards, cathode ray monitors, joysticks, motors. Almost none of these are manufactured any more, so they’re all saved. Even completely stripped cabinets can have value: people often use them as a shell for their own arcade machines, using a PC and LED monitor. “Our customers can be really creative,” says Conridge. “We have people turning them into cocktail cabinets, stands for DVD players and games consoles. It’s nice because they’re not ending up in a landfill site – they’re getting another life.”

Conridge reckons half his machines go to retro bars and modern arcades. The rest are bought by private collectors. There’s a highly active arcade-collecting community, based around Discord servers and forums such as UKVAC, and Covid brought in a lot of new customers who started building gaming dens in the midst of lockdown.

Besides retro pinball tables and 1990s hits, the big sellers are attached to film or TV licences. Play Leisure has sold three Star Wars Battle Pods, really big immersive machines, for £10,000 each. An Aerosmith-branded arcade game named Revolution X will sell for £1,500, an X-Files pinball table for £3,500. There’s an odd market too for old coin-pushing machines, mostly thanks to the TV quiz show Tipping Point and the growing popularity of TikTok accounts that specialise in coin-pushing live streams.

Joao and I spend the whole day here, snaking between the machines, peering into their exposed innards. We photograph everything. A long time ago we worked together on the video game magazine Edge, often reporting on arcade shows – these machines, which are now antiques, were the newest, hottest tech when we started our careers.

And before that, as a kid, I hung out in arcades in the 1980s. Donkey Kong, Defender, Space Harrier, Out Run; a pocket full of 10 pence coins, a whole day to waste. It is bittersweet to see the machines here, their CRT monitors cracked or missing, light gun holsters worn and split.

It is good that these things are being saved. To many of us, these are more than just disposable commercial products: they are works of art containing within them the experiences of thousands of players, my own included.